3-Phase Cast Resin Busduct

3-Phase Cast Resin Busduct

Cast resin busways are divided into two types: three-phase four-wire system and three-phase five-wire system. The former adopts a four-conductor layout consisting of three phase lines (A, B, C) and one neutral line (N), without an independent protective earth line (PE).
Send Inquiry

Product Introduction

 

Cast resin busways are divided into two types: three-phase four-wire system and three-phase five-wire system. The former adopts a four-conductor layout consisting of three phase lines (A, B, C) and one neutral line (N), without an independent protective earth line (PE). Its shell cannot function as an earth bar either, so it is not suitable for overly complex electrical scenarios.Compared with the former, the latter adds an independent protective earth bar, making it safer and more reliable during power transmission. The material of the PE bar is the same as that of the other three phase lines. In case of equipment leakage faults, the PE bar can conduct the fault current to the earth within milliseconds by virtue of its low impedance characteristic, greatly reducing the risk of electrification of the equipment shell. Therefore, it is widely used in places with extremely high requirements for electric shock protection.Meanwhile, the physical separation design of the N bar and PE bar effectively avoids the interference of neutral line harmonic current on the PE line, which can provide stable and safe power supply for servers, precision instruments and other equipment, ensuring the efficient operation of the system.

 

Application Scenarios

 

1.Three-phase four-wire system:

It is suitable for scenarios mainly with three-phase power loads such as motors and fans, where the load symmetry is high and the requirement for zero-sequence current suppression is low; as well as low-voltage power distribution systems for non-precision equipment and other scenarios where the demand for leakage protection is not high and the grounding system is used infrequently.

3-Phase 4-Wire Cast Resin Busduct

 

2.Three-phase five-wire system:

It is applicable to high-rise buildings and commercial complexes with complex load types and dense crowds, where strict leakage protection is required; medical facilities equipped with precision electronic devices; chemical workshops with flammable and explosive risks; and places with high requirements for protection levels.

3-Phase 5-Wire Cast Resin Busduct -

 

Product Specifications

 

Product Name 3-Phase Cast Resin Busduct
Brand Anbusway
Conductor Material Copper Busbar /Aluminum Busbar
Protection Class IP68
Rated Voltage 380V
Rated Current 250A - 6300A
Rated Frequency 50Hz
Warranty Period 2 years
Enclosure Treatment Epoxy Resin Casting
Packaging Default wooden case packaging, customized packaging supported
Manufacturing Address Yangzhong City, Jiangsu Province,China
Certifications CE, CB
Application Scenarios Outdoor & Underground Application

 

Hot Tags: 3-phase cast resin busduct, China 3-phase cast resin busduct manufacturers, suppliers, Underground Bus Duct, Outdoor Bus Duct, Waterproof Busduct, Epoxy Resin Cast Busway Elbow, Waterproof Busway, 3 Phase Cast Resin Busduct

Send Inquiry